
Matter over Wi-Fi in an A19 body. Pairs to HomeKit, Google or Alexa with the code on the box.
Zigbee 3.0 rotary scene button; gateway required, hub model unverified.
Made by MOES · MPN ZT-RD02
A battery-powered rotary scene button that mounts with a magnetic base and adhesive pad, so nothing is cut into the wall. It is the MOES ZT-RD02, supplier model SYT-ZB01. It joins a Zigbee 3.0 network through a gateway, and no mains wiring runs to the button.
A Zigbee 3.0 gateway is required: the button does not connect over Wi-Fi and does not work with the phone app alone, and we have not confirmed which gateway models pair with it. Once paired, each gesture can trigger a scene in the gateway app: single press, double press, long press, rotate clockwise, rotate counter-clockwise. Remote dimming mode puts brightness and color temperature on the dial. It applies only to Zigbee luminaires on the same gateway, not to every light in the house.
Power comes from one CR2450 3 V coin cell, which is not included. The supplier rates standby current under 8 µA and battery life at up to about 12 months; we have not measured either figure. The housing is 45 mm across and 26 mm deep at 59 g, rated for -10 to 55 °C and 0 to 99 % RH. Mounting is magnetic plus adhesive, with no screws and no drilling.
Each line below is one combination: this device, that hub, that firmware — with the date it was checked on the right. For ecosystems not listed here, we make no claim.
Editor’s note: Supplier documentation lists a Tuya / Smart Life Zigbee gateway as a requirement and does not name a specific gateway model. We have not paired this button with any gateway, so pairing behaviour on a specific model is unconfirmed. No certificate ID was obtained, so this page makes no certification claim. The supplier pack list does not confirm a battery, so we list it as not included. The four detail cards are our own illustrations built from the specification, not supplier photography.





Matter over Wi-Fi in an A19 body. Pairs to HomeKit, Google or Alexa with the code on the box.

A Matter bulb that pulses with audio. Nine qualification certificates on file with the supplier.

Wi-Fi and Bluetooth in one bulb, 110-130 V variant listed, supplier claims UL.

The controller, not the strip. ZigBee 3.0 with a physical reset button on the case.
No reviews for this product yet. Once yours is installed, come back and share how it went.